| northern industrial tools 16in straight line air sander model 15772 | ||||
|
At AirSanders.com we specialize in air sanders, as well as any other tools you can thinks of. Our large inventory of air sanders makes sure we have the air sander in stock that you are looking for. Click hereIn short, northern never over-speed industrial a grinding wheel. The speed of the tools grinder must be compared to the speed 16in marked on the wheel straight or package line to make sure the air and sander machine''s speed is at or model and 15772 and northern and industrial below the maximum tools operating speed of the wheel. Surpassing this rating 16in risks not straight just wheel breakage but also the safety of line shop air personnel. About the author: Roger Cloutier is a senior product safety engineer for sander the Norton Abrasives model and 15772 brand northern and industrial of Saint-Gobain tools and 16in and straight and line and air Abrasives in Worcester, sander Massachusetts. One model potential source 15772 of serious injury northern in grinding comes industrial from an oversight that is easy to make: operating the wheel in an over-speed condition. tools While a wheel 16in and straight and line that is run far enough in excess of its rated air and sander maximum speed may model shatter within 15772 and northern minutes of industrial operation, tools danger may also result from a wheel run just slightly faster than its rated 16in and straight and line speed. This less severe over-speed condition air can cause the wheel to be damaged, and the sander damage may result in breakage model and 15772 after further use. northern For example, operating a reinforced, 9-inch diameter, Type 27 wheel rated industrial for a maximum speed tools of 6,600 rpm on a 7-inch 16in angle grinder straight and line with a speed of 7,700 air and sander rpm can cause the model wheel to crack. This cracking can lead 15772 to breakage northern later. Any of these actions industrial sets up a disastrous scenario that tools could 16in lead to an accident involving serious injury or straight death. The line and air and sander and model and 15772 and northern and industrial and tools hazard of running man over-speed condition comes from centrifugal force. 16in A straight result of rotary line motion, centrifugal air and sander force is model and 15772 what causes a weight on northern the industrial end of a string tools and 16in to pull the string taught when the weight is swung in a circle. This same force causes the mass of the grinding wheel to be pulled outward straight from the center line of rotation as the wheel air and sander and model is spinning 15772. ©2003 www.airsanders.com. All rights reserved. |