Danger comes from the fact that centrifugal force does not increase in direct proportion to an increase in speed, but ingersollrandheavy-dutyairanglesandermodel313 instead it increases as the square of that speed increase. When rotational ingersollrandheavy-dutyairanglesandermodel313 speed doubles, centrifugal force quadruples. This effect means that relatively small changes in speed can produce significant increases in force. In the example mentioned, changing from 6,600 rpm to 7,700 rpm multiplies the speed by 1.167. However, ingersollrandheavy-dutyairanglesandermodel313 the corresponding centrifugal force would multiply by a factor of 1.167 x 1.167, or 1.36. To take ingersollrandheavy-dutyairanglesandermodel313 a more ingersollrandheavy-dutyairanglesandermodel313 and ingersollrandheavy-dutyairanglesandermodel313 extreme example, consider the same wheel with a maximum safe operating speed of 6,600 rpm run on a 5-inch right angle grinder at 10,000 rpm. This represents an over-speed of about 1.5 times the wheel''s designed ingersollrandheavy-dutyairanglesandermodel313 speed. But the corresponding centrifugal force-and the corresponding rotational stress on the wheel-would be about 2.3 times as much as the maximum allowed.

The hazard of running man over-speed condition comes from centrifugal force. A result of rotary motion, centrifugal force is what causes a weight on the end of a string to pull the string taught when the weight is swung in a circle. This same force causes the mass of the grinding wheel to be ingersollrandheavy-dutyairanglesandermodel313 pulled outward from the center of rotation as the wheel is spinning.

©2003 www.airsanders.com. All rights reserved.