| chicago-pneumatic 1 hp 7in heavy duty vertical sander model cp865s | ||
|
At AirSanders.com we specialize in air sanders, as well as any other tools you can thinks of. Our large inventory of air sanders makes sure we have the air sander in stock that you are looking for. Find hereOne potential source of serious injury in grinding comes from an chicago-pneumatic and 1 and hp oversight that is easy to make: operating the wheel 7in in an over-speed condition. While a wheel that is run far enough in excess of its rated maximum speed may shatter within minutes of operation, danger may also result from a wheel run just slightly faster than heavy its rated speed. This less duty severe over-speed vertical condition can sander cause the wheel to model and cp865s and chicago-pneumatic be damaged, 1 and the damage may result in breakage hp and 7in after further use. For example, operating a reinforced, heavy 9-inch diameter, Type duty and vertical and sander 27 wheel rated model for a maximum speed of 6,600 rpm on a 7-inch angle grinder cp865s and chicago-pneumatic and 1 and hp with a speed 7in and heavy of 7,700 rpm can cause the wheel to crack. This cracking duty can vertical lead to breakage later. Any of these actions sander sets up a disastrous model and cp865s scenario that could lead to an accident involving serious injury or death. In short, never over-speed a grinding wheel. The chicago-pneumatic and 1 speed of the grinder must hp be compared to the speed marked on the wheel or package to make sure the machine''s speed is at or below 7in the maximum operating speed of the wheel. Surpassing heavy this rating risks not just wheel breakage but also the safety of shop personnel. duty About the author: Roger Cloutier is a senior product safety engineer for the Norton Abrasives brand of Saint-Gobain vertical Abrasives in Worcester, Massachusetts. The sander and model hazard of running cp865s man over-speed condition comes from centrifugal force. A result of rotary motion, centrifugal force is what causes a weight on the end of chicago-pneumatic a string to pull the string taught 1 when the weight is swung in hp a circle. This same force causes the mass of the grinding 7in and heavy wheel to be pulled outward from duty and vertical and sander the model center of rotation as the wheel is cp865s spinning. ©2003 www.airsanders.com. All rights reserved. |